Silicon carbide semiconductors make electric cars more efficient
- Harald Kroeger: “Silicon carbide semiconductors bring more power to electric motors. For motorists, this means a 6 percent increase in range.”
- Only Bosch is equally at home in the automotive and the semiconductor industries.
- With its new semiconductor plant in Dresden, Bosch is strengthening its competitiveness.
in Bosch, 08-10-2019
Nowadays, all cars feature semiconductors. There are more than 50 of them in every vehicle that rolls off the production line. The new microchips made of silicon carbide (SiC) that Bosch has developed will now help electromobility make a great leap forward. In the future, the chips made of this extraordinary material will set the pace in the power electronics – the command center for electric and hybrid vehicles. Compared to the silicon chips used to date, SiC semiconductors have better electrical conductivity. This enables higher switching frequencies while also ensuring that much less energy is dissipated in the form of heat.
„Silicon carbide semiconductors bring more power to electric motors. For motorists, this means a 6 percent increase in range.“
Harald Kroeger, member of the Bosch board of management
Bosch manufactures the new generation of semiconductor chips at its Reutlingen plant, 25 miles south of Stuttgart. At this plant, the company has been turning out several million microchips every day for decades.
SiC: a booster for e-mobility
Semiconductors made of silicon carbide set new standards for switching speed, heat loss, and size. It all begins with additional carbon atoms, which are introduced into the crystalline structure of the ultra-pure silicon used to manufacture semiconductors. The chemical bond created in this way turns the semiconductor chips into real powerhouses. Especially for applications in electric and hybrid vehicles, this means many advantages. In power electronics, they ensure that 50 percent less energy is lost in the form of heat. This saving translates into more efficient power electronics and more energy for the electric motor and therefore for the battery range. Motorists can drive 6 percent further on a single battery charge. In this way, Bosch is addressing one of the stumbling blocks for potential buyers of electric cars: nearly one in two consumers (42 percent) decide against buying an electric vehicle because they are afraid the battery will run out while they are on the road. In Germany, this anxiety is even more prevalent, affecting 69 percent of consumers (source: Consors Finanz Automobile Barometer 2019). Alternatively, car manufacturers can make the battery smaller for a given range. This reduces the cost of an electric car’s most expensive component, which in turn reduces the vehicle’s price.
„Silicon carbide semiconductors will transform e-mobility.”“
Harald Kroeger, member of the Bosch board of management
The reason is that the new technology also offers further potential savings down the line: the much lower heat losses of the chips, combined with their ability to work at much higher operating temperatures, mean that manufacturers can cut back on the expensive cooling of the powertrain components. That has a positive impact on electric vehicles’ weight and cost.
Bosch: at home in the automotive and semiconductor industries
With this silicon carbide technology, Bosch is systematically expanding its semiconductor know-how. The company will be using the SiC semiconductors in its own power electronics in the future. For its customers, this brings together the best of both worlds, as Bosch is the only automotive supplier that also manufactures semiconductors. “Thanks to our deep understanding of systems in e-mobility, the benefits of silicon carbide technology flow directly into the development of components and systems,” Kroeger says. As one of the leading manufacturers of automotive semiconductors, Bosch has been exploiting this globally unique advantage for almost 50 years. In addition to power semiconductors, these include microelectromechanical systems (MEMS) and application-specific integrated circuits (ASICs).
Whether in airbags, belt tensioners, cruise control systems, rain sensors, or powertrains, there is scarcely a domain in modern automotive technology that does not rely on microchips. In 2018, the value of the chips in an average car was around 370 dollars (337 euros) (source: ZVEI). While this amount is growing by 1 to 2 percent annually for applications not relating to infotainment, connectivity, automation, and electrification, on average an electric vehicle has additional semiconductor chips worth 450 dollars (410 euros) on board. Experts predict that this figure will increase again by around 1,000 dollars (910 euros) as a result of automated driving. This makes the automotive market one of the drivers of growth in the semiconductor sector. Furthermore, key applications of the internet of things, such as artificial intelligence, cyber security, smart cities, edge computing, smart homes, and connected industry, will drive future growth in the domain. With its semiconductor factories in Reutlingen and Dresden, Bosch is well prepared for these developments: “Our semiconductor know-how helps us not only to develop new automotive functions and IoT applications but also to continuously improve the chips themselves,” Kroeger says.
Bosch is strengthening its competitiveness
Turning the circular discs of silicon or silicon carbide – the wafers – into semiconductor chips involves an elaborate manufacturing process that can last up to 14 weeks. In several chemical and physical processes, the wafers acquire ultra-fine structures that will subsequently make up the tiny chips, each of which measures just a few millimeters. In June 2018, Bosch laid the cornerstone for its state-of-the-art semiconductor factory in Dresden. Its manufacturing operations will use wafers with a diameter of 300 millimeters. This means significantly more chips from a wafer, and correspondingly greater economies of scale than with semiconductors based on 150- and 200-millimeter technology. Bosch produces the latter in Reutlingen, where it will also manufacture the new SiC chips. The wafer fabs in Reutlingen and Dresden complement each other perfectly. This enables Bosch to further strengthen its competitiveness. “Semiconductors are a core component of all electrical systems. They are also turning data into a coveted raw material of the future. As they are becoming increasingly important in our fields of activity, we want to continuously expand our manufacturing operations,” Kroeger says. In its wafer fab in Dresden, Bosch is investing around a billion euros – the largest single investment in the company’s history. In the factory, facilities are currently being installed in the clean room areas. The first associates are due to start work in the spring of 2020. Bosch will operate the plant as a carbon-neutral site.